Perseverance Essay

Perseverance is such a powerful word that has so many meanings. Mastering what this word means, results in such a successful life which yet takes a lot of discipline to achieve. Most peoples summaries of perseverance is never giving up even when things aren’t going your way. Which is correct, but I think about perseverance in references of some of our world’s greatest leaders. Take for instance one of America’s greatest Civil Rights leaders Dr. Martin Luther King Jr. People were so hatred, spiteful, and cruel to this extraordinary man. But did he ever give up when the going got tough, no. Did he just say, â€Å"Hey man, this is too hard for me to handle! †, no. What did he do, He kept pushing through. When people were spitting at him or cursing at him or even burning down his house, he didn’t stop what he was doing. Now you might ask why would someone go through so much trouble. Well that question is easy to answer. He never stopped because he belie ved in what he was doing. He believed that the dream he was chasing for, was to better the world and to better the human race. That’s why when he was announced deceased everyone commended him on his great accomplishments. He showed an abundance of perseverance. Nothing is better than you. You should never give up. You can take a break, but never give up. Perseverance is a very important and positive character trait to have in your life. You have to have steady persistence in spite of difficulties, discouragement, or obstacles. Failure only occurs when you stop trying or pushing through. You can’t go through life quitting everything that seems to be too hard to handle. If you’re trying to excel in something you have to stick to it, better yourself, and try harder. Someone or something is always going to be there trying to distract you from achieving your dreams and/or goals. Your job as a person is to decide not to be distracted and let go of anything that is standing in your way. You have to have faith, hope, consistency and hard work to accomplish anything. You also have to take responsibility for yourself. If you need help ask for it. Chances are someone has the same question as you but are just too scared to ask. Being optimistic and having self-confidence help you to reach your goals and purposes. Even though people express it more than others, perseverance not only ensures survival but it also ensures success. When we have that burning desire to achieve something, it is a great feeling of accomplishment when the goal we strive for is fulfilled. Unfortunately, throughout our journey, on the road to success there will be a great amount of trials and tribulations standing in our way. Only through perseverance can we conquer those obstacles that make our journey harder. When I used to have trouble with my schoolwork with not turning them in, not doing it, or turning them in late, I was so confused. I used to be unorganized and wouldn’t ask question when I don’t understand the work that was handed to me because I didn’t want to be made fun of. That’s what’s wrong with our generation now. No one wants to ask question because we’re scared of being laughed at or made fun of. I knew that I could do better than what I was doing. I knew that it would only get harder and harder as the days went on and when I collected more and more homework. I came home one day and decided to watch a movie just to ease my mind. I logged on my Netflix account and watched Pixars: Finding Nemo. This is one of my favorite childhood movies. As I watched it I heard the voice of Ellen DeGeneres who starred as Dorothy sing â€Å" Just keep swimming, just keep swimming, just keep swimming swimming swimming.† That’s when my life turned around for the better. That quote had me realize that when the going get tough, just keep going. When things become difficult, just keep going. When life throws obstacles your way, just keep going. When you feel like there’s nothing you can do, just keep going. My life has just began throwing obstacles out me. I know it will only get harder as time rolls on. But I’m confident and I know I can handle it. Th ere’s no obstacle too big that you can’t handle. If you feel as though it is too difficult to handle ask for help or guidance. There will always be someone who’s there to help you. Having a positive outlook on negative situations are the key to success. Having patience is another key to success. Knowing that things take time and nothing comes over night is a good way to think positively. For example: if you had a bad day at work, no one was doing their job correctly and and  cooperates are blaming you is a good time to show positivity. You can ask everyone to make sure their job is done correctly and hopefully the next day won’t be so bad. Without perseverance our world leaders wouldn’t explore new lands and human civilization would be impossible. A great number of modern successful international corporations were close to bankrupting, but perseverance enables them to stay and improve their businesses. People who have lack of perseverance either ends up poor job that pays less than minimum wage or with a tremendously bad life situation. Most people are waiting on someone to do their work for them. Relying on the government, law, and some donations but never put in the effort to do their own work. A perseverant person can stand all the difficulties of the environment and survive in the most difficult situations, including nature, unfavourable government, etc. Perseverance to me is the determination in a person to not let anything or anyone stop you from obtaining a goal. It is very important that everyone have perseverance because most people would not make it in life without it. It gives you ethics and makes you a more stronger and more responsible person. A person who is highly intelligent, and a scholarly genius, but is lethargic by nature, and reluctant to diligence, can hardly prosper in life, because he does not know how to use his brain and labour in the right direction. In this world, all the great things have been made or constructed only by perseverance.In human life, perseverance plays a very important role. Modern science, architecture, literature, music-in every sphere of life-perseverance is the root cause of suc ­cess and glory. Shakespeare did not compose such volumi ­nous works just in a day. He had to work hard during days and nights with tremendous perseverance to create such great masterpieces. Therefore, perseverance must be practised from the very childhood so that the noble habit becomes a part and parcel of one’s life. With that great asset or goodwill, a man can walk easily on the hazardous road of his life’s journey; and success will be his and his only.

Compare and contrast essay “traveling through the dark” and “woodchuck” Essay

â€Å"Traveling through the Dark† by William E. Stanford and â€Å"Woodchucks† by Maxine Kumin a man must make the choice of nature and its ways. Both poems have their similarities and differences. Traveling through the dark and woodchucks share various ways of similarities, Man vs Nature Death situations are involved in both poems. Through the use of narrations both poems have different attitudes. Traveling through the dark starts off dark and progress towards a more serious tone and, the reader sympathizes with the main action in getting the dead deer off the road. So he can prevent future deaths. Both poems use strong verbs to communicate the point effectively as possible. Traveling through the dark has no rhyme scheme and follows contemplative tone, that comes from the decision of life and death which sets the mood of the poem: sadness and despair. Kumin uses â€Å" beheaded† and â€Å"hooked† to illustrate the images to she wants to communicate. In Woodchuck, Maxine talks about the violence in killing the woodchuck and actually shows the reader the killing and violence whereas the Traveling through the dark illustrates a human reaction to the less-violent act. The poem however does have a rhyme scheme but does not conform to conventional forms of rhyme. The first stanza happens when the speaker describing their failed attempt to eliminate the pest. Following through the poem a sense of humor becomes between the writer and the woodchucks. Each poem has a violent, grim, painful and guilty tone to it, maybe some or less in others. while reading â€Å"traveling through the dark† the doe’s death and the inescapable fate of the baby fawn brings on a feeling of guilt, more so that the poem of the â€Å"woodchucks†, also in the contrast the â€Å"woodchucks poem emphasizes on violence more than its partner. Throughout the story the narrator is blood thirsty and cares only about the death of woodchucks but does not relate to what is actually happening around the time or what was happening around him the nazi period. The death of each animal leaves the reader feeling sad and hopeless. In comparison, Kumin only focuses on the man’s reaction to the the woodchucks â€Å"beheading the carrots†, traveling through the dark is more objective as compared to the woodchucks which is more emotional although they are both almost equal effective.

Exterminate All the Brutes Summary

Lindqvist has written more than thirty books of essays, aphorisms, autobiography, documentary prose, travel and reportage.. [4][3] He occasionally publishes articles in the Swedish press, writing for the cultural supplement of the largest Swedish daily, Dagens Nyheter, since 1950. [5] He is the recipient of several of Sweden's most prestigious literary and journalistic awards. His work is mostly non-fiction, including (and often transcending) several genres: essays, documentary prose, travel writing and reportages. 4] He is known for his works on developing nations in Africa and the Saharan countries, China, India, Latin America and Australia. In the 1960s, partly inspired by the works of Hermann Hesse, Linqvist spent two years in China. He became fascinated by the legend of the Tang dynasty painter, Wu Tao Tzu, who, when standing looking at a mural of a temple he had just completed, â€Å"suddenly clapped his hands and the temple gate opened. He went into his work and the gates clo sed behind him. [6] His later works, from the late 1980s, tend to focus on the subjects of European imperialism, colonialism, racism, genocide and war, analysing the place of these phenomena in Western thought, social history and ideology. These topics are not uncontroversial. In 1992, Lindqvist was embroiled in heated public debate, when his book Exterminate all the Brutes was attacked for its treatment of the Second World War and the Holocaust. 4] Opponents accused Lindqvist of reducing the extermination of the Jewish people to a question of economical and social forces, thereby disregarding the impact of Nazi ideology and anti-Semitism and what they viewed as the unique historical specificity of the Holocaust. [4] Some of the harshest attacks were launched by Per Ahlmark, who declared Lindqvist to be a â€Å"Holocaust revisionist†. This prompted a furious response by Lindqvist, who considered it a defamatory smear — at no point had he ever called into question the N azi responsibility for, or the number of dead in, the Holocaust.Regarding the original dispute, Lindqvist retorted that his main argument was correct: the Nazi quest for Lebensraum had at its core been an application of the expansionist and racist principles of imperialism and colonialism, but for the first time applied against fellow Europeans rather than against the distant and dehumanized peoples of the Third World. [4] However, he agreed that the long tradition of anti-Semitism in European and Christian thought had given the anti-Jewish campaign of the Nazis a further ideological dimension, and amended later editions of the book to better reflect this. [4]

T&m-wk7 Essay Example | Topics and Well Written Essays - 500 words

T&m-wk7 - Essay Example Thus, she would be able to understand the different personality traits that the students have and design the classroom activities accordingly. Furthermore, it will also help in the identification of the children at risk for adjustment problems and take appropriate measures. The information that is collected through the administration of the FFPI-C should be kept private and confidential. The children should be able to withdraw themselves and their data any time during or after the research. Furthermore, there is an issue whether the parents of the children should know about the results of the personality tests or not (Lefaivre, Chambers & Fernandez, 2007). Pennie you are using Myers-Briggs test for the purpose of personal development and leadership training among the members of Parent Teacher Organization (PTO). The purpose for which you chose this particular test is quite apt because the test basically investigates areas such as group dynamics, leadership training and personal development. On the other hand, it would have been much clearer if you had mentioned the four personality traits that the test measures. These include â€Å"extroversion and introversion, sensing and intuition, feeling and thinking and judgment and perception.† These traits should have been mentioned because it would have helped the reader to better understand the purpose of using Myers-Briggs in a group setting (Ford-Martin, n.d). Even though, administering Myers-Briggs in a Parent Teacher Organization (PTO) is quite appropriate, but you can also use it in an organization where teams are established to fulfill organizational goals. The employees’ personality traits can be evaluated using Myers-Briggs test after which the teams would be made accordingly. This will help in bringing people with different personality traits together and achieve the organizational goals through a combined effort (MBTI: Type at Work, n.d). As you suggested

Behavioral Economics Essay Example | Topics and Well Written Essays - 2750 words

Behavioral Economics - Essay Example Hedonic treadmill is a variant of the term hedonic adaptation, which compares an individual's "pursuit of happiness to a person on a treadmill, who has to keep working just to stay in the same place" (Wikipedia). Social etiquette or stipulations or expectations can be a factor that molds the ability to adapt in individuals, and hence, in the community as a whole. The human beings obey or conform to certain unwritten axioms of the society which are considered to be the acceptable norms of the community. This leads to his or her voluntary suppression of certain needs or aspirations as a matter of course. This can also be caused by biases or prejudices that prevail in the society, for example, those that are based on genders, age groups, social status, hierarchies, income levels, etc. Religious principles, beliefs or way of life can also lead to an individual's conforming to certain expectations and thereby compromising on his wants, achievements and aspirations as well as his choices. If a human being can actually be happy with his misfortunes based on his religious beliefs, for example, of his or her miseries being God-given or his or her state being the will of God, etc., then his mental status would actually be happy. This means that even the unemployed, the beggar and the exploited can feel happy and satisfied with their lot. However, this may facilitate the study of human well-being and development unfavorably. In adjusting to a worse life situation, an individual's adaptation is downwardly directed. That is, he or she adjusts to being happy being in a circumstance worse than he or she used to be in. This kind of adaptation is harmful or damaging in that it influences the individual to avert from making rational or reasonable choices. This, naturally, affects development and its applications aversely. This is a conclusion more from an economic or a materialistic point of view, but when you take into consideration an extremely economically backward and thoroughly deprived community, "it is only prudent to wonder how much suffering and misery there would be in the absence of adaptation" (Clark 8). Another form of adaptation is that which is a result of inadequate know-how or awareness. When an individual is not equipped with adequate knowledge, his or her choices, naturally, will not be rational, reasonable or optimum for him or her. In such cases the utility concepts cannot be ideal for conducting development studies and practices. The parameters may change for situations where the individual is able to gather knowledge and where he or she is not. However, with modern-day advancements in the technology of communication, the disparity in the capability levels of acquiring information is going to be less and less. An individual who is in an extremely lowly situation, with most of the essentials of life not being fulfilled to any decent degree whatsoever, if he has adapted to his situation without complaints, as it usually happens in most of the low-economic groups, and he is resigned to be happy with the little pleasures that is available to him, he may not appear to be highly deprived in terms of utility. In such cases, the concepts of utility may not be the reliable or adequate bases for studying human well-being. From all of the factors

Questions week 10 Essay Example | Topics and Well Written Essays - 250 words

Questions week 10 - Essay Example This would mean that cars that could not move could not be stolen. Thus, this solves the crime of stolen cars. Other crimes such as murder cannot necessarily be solved since people are free to make their own decisions and decisions are often unpredictable. However, positive role models and morals can influence better decisions. Society in general, has a responsibility when it comes to crime in society. Geographical locations, race and gender determine how society acts towards others. These actions can leave society responsible for crime. It is also important to determine influences that society has. Society can influence crime and should take responsibility for its influences whether positive or negative. Our current policies are not enough since the increase of crime is happening everywhere. A change needs to take place that enforces better policies that work. If I could personally do something differently I would choose to help change society which in return can help to change crime. A better and more responsible society with adequate morals can contribute to a lessened crime rate and better actions throughout society. Most of this positive change should come from role models, mentors and any parental

What are some of the ways that metropolitan areas coordinate Essay

What are some of the ways that metropolitan areas coordinate governmental activites and services accross a region, while at the same timeprotecting the values of suburban independence - Essay Example This is a good example of the consolidated metropolitan area governance, where city and county divide and share the responsibility of providing core services and coordinating activities within its area. Thorough and organized planning between the city and the county helps to make the governance more efficient and economical. The biggest city in the area, Miami, and 34 other towns provide a lower level of services, such as fire, water/sewer, parking, zoning, etc. At the same time, the Dade County provides the higher level of services, such as school, emergency management, airport, regional transit, and public housing. At the same time, the County provides lower-level services for areas that are not incorporated under Miami-Dade County governance. There are some services that are provided at both levels, such as parks and recreation. Both levels of government that coordinate services and activities in the larger Miami area impose taxes. The Dade County operates under an Executive Mayor , who is appointed by the County Manager, and a County Commission. In some regions, however, the above mentioned formal form of governance is not politically feasible, thus some forms of functional governance emerge. An example of the functional governance is Portland, Oregon. Oregon has a Metropolitan Planning Organization (MPO). There are many MPO throughout metropolitan areas in the United States, which are considered an innovative form of functional governance. Their formal role is to develop and manage regional transportation plans. However, more and more responsibilities are delegated to MPOs by the local governments. Oregon has the most powerful MPO in the country, the power of which crosses 3 counties and 25 cities. Unlike typical MPOs, Oregon MPO manages not only transportation, but only parks and recreation, and public facilities, as well as oversees land use and urban growth boundary. Thus, I

Religious visit Essay Example | Topics and Well Written Essays - 1750 words

Religious visit - Essay Example I spoke to a few of them and finally decided to visit the Shri Shivdham Hindu Temple in Orlando. The visit has brought about changes in me, in the perception of people and things, in the outlook on life. Shri Shivdham Hindu Temple, located in Orlando, allows visitors at fixed times during the day. I had called up in advance to get the location but fixed appointment for any service is not necessary. However, it was useful to obtain the service timings so that one does not miss out on the service that is performed. The temple is closed to the visitors between 1 and 5pm so I made it a point to reach thereby noon. This temple was established in 2002 and regular Hindi language classes are held in addition to Yoga and meditation classes. The temple regularly invites various swamis and scholars to give discourses on different spiritual subjects. The temple’s address is: 460 O’Berry Hoover Road, Orlando, FL 32825-6908. I also took the directions how to reach there was told to drive west on East Colonial drive (Hwy 50). On crossing the Alafaya trail (Landmarks: Channel 24/ Advance Discount Parts / Big Lots) I was asked to make a left on O’Berry Hoover Road. The Shiv mandir is located at the end of the road on the right side, I was directed. The directions were perfect and surprisingly I found that my attention too was rapt; I did not miss any turn. This itself suggests we have the power and the quality to be attentive if we so desire. Moreover, when we want to do something good, our actions, thoughts and attention are all at their best. On arrival I was nonplussed. As I said I had heard about temples and mandir but I never expected to be greeted by such positive vibrations even before entering the temple area. The entire area reverberates with chanting of hymns of Shiva. The chanting was all in Sanskrit, mostly in the form of mantras and the vibrations touch you. It had a very soothing and comforting effect

Entrepreneurship Essay Example | Topics and Well Written Essays - 500 words - 7

Entrepreneurship - Essay Example disadvantages of this form of business relates to the difficulty to raise capital and lack of continuity in situations when the owner is absent (Canada-Saskatchewan Business Service Centre, 2011). The other form of business is a partnership, which is commenced by a minimum of two or more individual, who owns and manages the business. The partners share unlimited liabilities of the business, and they run the business together. Some of its advantages relate to the ease of raising capital, and partners are jointly responsible for obligations of the business. However, the business has some disadvantages, which relates to the slow decision making and there is a chance of dispute occurring resulting to dissolution of the business. A corporation is a limited liability business owned by multiple shareholders, who elect the board of directors to run the business. The business is distinct from the owner and they are able to borrow money and sign contracts pay taxes and be sued, while profit is gained from the dividends or appreciation of stock, but they are not liable for the company obligations. Therefore, some of the advantages associated with this business relates to the ability to raise funds through sales of stock, while the shareholders are able to transfer their ownership easily by selling stock. The owner has limited liability; thus, it only covers the value of stock in the corporations. On the other hand, some of the disadvantages relate to the restrictions due to regulations and monitoring by government agencies, thus making it more costly to incorporate compared to other forms of organizations. The profit is taxed by the corporate tax rate, and shareholders’ dividends are not deductible from the corporate income. The limited liability companies are simple, and their liability is limited, thus is allows the entrepreneurs to keep their own assets and finances separate from the business. One of the advantages of the limited liability companies is offering

Heinrich's theories Article Example | Topics and Well Written Essays - 500 words

Heinrich's theories - Article Example Freud A. Manuele, the writer of this article reports that Heinrich’s law about the industrial accidents and its causes does not apply to the current situations and thinking. In his article He quotes work of different people who has worked on the same area. He is of the view that knowledge derived from those works seem to have been evolved in the aspects of how accidents take place and their contributing factors.Heinrich by calling him the ‘pioneer’ in the field of accident prevention and considering him to be the promoter of occupational safety and health. Though the article is about dislodging Heinrich’s law it also seems to appreciate his work to be the literature and background to the study which is the positive aspect to Heinrich’s work.This article continues with Heinrich, focusing on the negative aspects of his work by stating his work to be unsound and not valid because of the un- authentication of the kind of methodology and survey documents used by him for the analysis.The Article considers Heinrich’s work to be a non- researched work and makes a call that such work should not be used as a source, but the focus should be driven towards the current knowledge. He supports his view by quoting approved researches and work done on industrial accidents. For example he quotes Walton who is of the view that 85% of the problems in any operation are within the system and are dependably of management, while only 15% lie with the worker which is opposite to what Heinrich’s point of view.

Ashlyfive point linguistic star Essay Example for Free

Ashlyfive point linguistic star Essay We’ve allowed a natural approach to language instruction to dominate our schools, hoping our English learners â€Å"will just figure it out. † (SCOE, 2009) This approach suggested by Kevin Clark proposes that teachers explicitly teach ELL by giving them a set of skills. Teacher will have to teach students not just vocabulary, but the sound system of language, the words and their word parts and meanings, and also rules for structuring sentences grammatically. Teaching students from this perspective can support a deeper understanding of the language. When the  concept is thoroughly supported by background knowledge, explanation as to why, activities that strengthen skills, and consistency in lesson structure that follows this pattern, students are more likely to understand the concept and create a platform from which to launch higher level thinking and conclusions on following concepts and content area. Students learn more efficiently when they have prior knowledge on a presented concept. If the student can link content to a concept that they gained from previous knowledge on from their own unique background or culture, it  will inevitably spark interest in that subject area. By sparking interest the teacher is now adding value to the lesson. Since students synonymize interest with value, the teacher would prove effective. Now a sense of purpose has now been infused into the lesson, and the student/students may begin to contribute more. (NCREL, 1990) This approach is rather intriguing, and teachers should be trained in linguistics prior to teaching ELLs. I would learn the subparts of linguistics via a course: phonetics, phonology, morphology, syntax, semantics, and pragmatics. By learning each subpart in-depth, I can better compose lesson plans and activities that explore those areas for the ELLs to better benefit. Understanding the mechanics of a language is just as important as understanding the language itself, for both teachers and students. The concept of prior knowledge should not be limited to the students but 2 LINGUISTIC APPROACH teachers should utilize this concept for their own effective instruction. If teachers have prior knowledge of the subparts of the English language, as well as knowledge of the diverse cultures  he/she is instructing can help the teacher create and blend a comprehensive and student-inclusive lesson plan and curriculum. Prior knowledge influences how the teacher and students interact with the learning materials as both individuals and a group. (Kujawa and Huske, 1995) Prior knowledge assists in segue of appropriate instruction and retention, because it is a foundation from which to build from and facilitates the idea of making sense of the educational experience. As the students are learning from the linguistic perspective, especially under syntax and  semantics, students would be primed for grammatical instruction, also. As they learn how, where and when to use appropriate vocabulary, I will insert instruction on main grammatical principles and rules and branch off into further instruction where applicable. I would try to make sound non-confusing connections with the native language grammatical principles, so there is a prior knowledge foundation established in that arena as well. I would also have a grammar day in the middle of the week to review prior concepts and morph new grammar lessons into the lesson  plan and utilize formative assessment strategies to see what needs to be reviewed and further defined. 3 LINGUISTIC APPROACH References Kujawa, S. , Huske, L. (1995). The Strategic Teaching and Reading Project guidebook (Rev. ed. ). Oak Brook, IL: North Central Regional Educational Laboratory. Restructuring to promote learning in Americas schools, videoconference #2: The thinking curriculum. (1990). Oak Brook, IL: North Central Regional Educational Laboratory. Sonoma County Office of Education. (2009) Structuring language instruction to advance stalled English learners. Aiming High Resource. Retrieved September 16 2014. 4

Technical Writing Fundamental Essay Example for Free

Technical Writing Fundamental Essay When evaluating the chosen manual several criteria were utilized which I believe are important elements in order for it to be effective see below. * Must be legible and easy to navigate through * The audience must be taken in consideration which means that it has to address all the needs of the audience * The instructions need to be easy to follow and have clarity to the intended audience. * It also must include background that the users can easily understand. * Correctness of the manual, punctuation, grammar. When accessing the manual for Pyle Pro (PWMA-230) operating instruction the first thing that sticks out in my observation is how readable the manual presents itself in a legible form that the reader can understand. The font’s size and style are appropriate for the manual this allows the reader little effort when viewing it which gives a better comprehension that makes it easily understood of the set of instructions. As it pertains to navigation of the manual there isn’t anything that is special or unique from many other manuals that you would see, just a matter of flipping the pages and following the explanation of what the equipment Intel’s. The manual I believe appears to address the intended audience needs appropriately. I take from the manual that the instructions are intended for average users of the amplifier who only want practical knowledge of how to operate the product. This manual describes the proper was of operating the amplifier without going into great detail and not allowing itself to have to get into a technical discussion that the user does not really care about anyway. As I read the manual one thing that really stuck out to me was the correctness of the manual there was the misspelled word â€Å"don’t†, throughout the â€Å"Remarks† section. Since this is an official document for the company its shows unprofessionalism by the preparer when they didn’t proofread to ensure that the correct grammar and punctuation was not utilized. The writer should know the correct rules or exactly what grammatical terms are expected to be used at all times. The background information about the product has many â€Å"don’t† that pertain to the products is very disappointing because of the misspelled word â€Å"don’t† which makes it a little harder to concentrate on what it is trying to convey to the reader. The warning to me are a little exhaustive with the exception of the dangers of opening the chassis or putting ones hand inside the chassis can be dangerous, the others are pretty much self- explanatory in my opinion. Throughout the manual it does include descriptions of the various amplifier components and diagrams of the product. Reference Manual link: http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Drill Press Redesign Project Design for Manufacture

Drill Press Redesign Project Design for Manufacture Drill press is the most vastly used mechanical machine around the world. Its usage is not limited to industries only, it is found and used even at homes in the form of portable or cordless drills. It is primarily used for cutting holes in specimen. Other functions that it can be used for include tapping, counter sinking, reaming, etc. There are three main types of drill press based on their versatility, size of workpiece it can handle and range. 1.1 Upright drill press First and the most commonly used type of drill press is Upright drill press. It consists of following main parts: (Groover, 2010) Base: It is the part that is in contact with the ground, it is made heavy to keep the drill bit from moving during operation. It can be bolted to the ground to keep the drill press fixed. Column: It is the part that acts as a backbone and provides support to the drill press. Drill press main sliding unit is attached to column as well and moves on the column. Work bench: it is a table attached to the column, it is used to hold the workpiece in place during operation. It consists of rails, through which bolts can slide and the fix the work piece on table at any location. Drill head: it is the top most part of drill press that contains the power spindle. 1.2 Radial drill Second type of frill press used in industries is the radial drill press. This type of drill press has larger range of cutting holes therefore it is used for large parts. Like upright drill press it also consists of Base, Column, Work bench and Drill head. In addition, it consists of one additional component that is explained below. (Groover, 2010) Radial arm: it is the component responsible for higher drilling range of radial drill. It can slide vertically on the column and also it can be rotated about the column and set at any angle. Drill head is fixed on the drill arm so it can slide across the radial arm and can be set at any distance from the column. 1.3 Gang drill Third and last type of drill press found in industry is gang drill. In this type of drill press, several upright drill press are arranged in a line that work independently but share the same working table. Therefore, this type of drill is used for cutting holes in sequence on same work piece or to perform sequence of operations like drilling, reaming, counter sinking, tapping, etc.ÂÂ   (Groover, 2010) This report will discuss the design for manufacture for the drill press main sliding unit. Material type has already been selected as polymeric material to reduce cost. For testing and feedback purpose, it is decide that initially only 20 units will be manufactured. After the positive feedback, this part will be manufactured commercially with production rate of 350 units per week. Task 1 (a) For a product to be successful, it should satisfy some set of requirements that the market / people demands and also the demands of industry. Functional requirements can be categorized into requirements of market, requirements during operation, manufacturing requirements and compliance requirements. (Rajput, 2008) 2.1 Requirements of market This product is intended for cottage industries as well for large production industries therefore its price should be in the range of 10 to 15 pounds per piece. Other demands of market include it should be easy to transport, high strength, safe to use, maintenance cost should be minimum and its life should be high. Finally, the product should attract people with its good aesthetics. 2.2 Operation requirements Most important requirement is that it should have enough strength to bear all the forces that will act on it during operation. The operation cost of the product that include the maintenance cost should be low. For the safety of the user, sliding motion of drill sliding unit on column should be smooth with less friction offered. High working temperatures are faced in drilling operation, therefore the melting temperature of the part should be high and it should be able to maintain its mechanical properties at high temperature as well. It should be used for variable chuck sizes.ÂÂ   (Rajput, 2008) 2.3 Manufacturing requirements Product should be light weight so that less material is required is required to manufacture it which will reduce its cost. Material requirements is polymeric material. Mass of the part should be just under 1.5 kg. Production time of the part should be such that production part of 350 part per week is achieved. Manufacturing technique for this part is injection molding therefore all the edges of the part should be properly filleted and sides should be drafted. Assembly and disassembly of the part should be quick and easy, fasteners would be used to mount the part on column for easy assembly and replacement of the part when required. (Rajput, 2008) 2.4 Compliance requirements Manufactured part should comply with the standards of The Society of the Plastics Industry so that there is uniformity among the manufactured parts and the replacement of part is easy. For this part standard SPI-B1 or SPI-C1 can be used. (Rajput, 2008) Task 1 (b) 3. Features, Manufacturing Process and Material Selection for DPMSU prototype The material available for manufacturing was polymer which became a basis for us to decide which process was to be followed. Keeping the economics, circumstances and suitability into consideration; injection molding was the most preferable process to manufacture the prototype of the drill press sliding unit. 3.1 Injection Molding Manufacturing Process In correspondence to our decision, Injection Molding is usually the most preferable and suitable process which is used for the manufacturing of materials made up of polymers. This process is highly flexible and diverse, and the products vary greatly in size and shape. Various shapes can be formed as a result of injection molding in a very short amount of time and with a very fine surface finish. (Groover, 2010) Figure 3: Parts of Injection Molding unit The process is very simple and easy to understand. Initially the raw material (plastic in our case) is inserted into the machine through the hooper placed on the top of the unit containing the reciprocating screw. To transport the plastic from the hooper to the mold core, a rotating screw is used which pushes these pieces towards the mold and applies pressure on them. The heaters on the wall around the screw melt down these pieces and eventually the molten plastic forms a highly viscous paste. This molten plastic is accumulated in the mold and the shape of the mold eventually ends up in the shape of the product. The plunging process of the machine makes sure that the mold is completely filled with the molten plastic and there are no further defects or any voids. This is all done due to the high pressure, the plunger exerts on the plastic. In the mold, the temperature drops and the molten plastic solidifies. The clamping unit is then separated with the help of clamping motor drive and chain. The part is then taken out very carefully because if too much force is applied, it might break or deform which might weaken its internal microstructure. This all depends on the way the part is designed and whether the stresses that occur during the removal process, are taken into consideration. Injection molding is an advantageous process in several ways which led us to choose this over any other. Injection Molding can produce parts of several shapes and sizes and in a very short amount of time. The products resulting from this process have very fine surfaces finishes. The labor cost is reduced greatly through this process and it leads it to be very economical. The wastage from Injection Molding is negligible and the remaining plastic can be re melted and used. (Groover, 2010) 3.2 Material When designing a drill press sliding unit, the most important parameter to consider was temperature. During drilling operations, the temperature might rise up very rapidly so a material with a very favorable temperature stability was required. The variation of material properties with change in temperature should be as low as possible. The second parameter to decide the material was the response of the material to forces and stresses applied during the molding process. Stresses not only played a role in deciding the material but also played a major role in the designing phase. These factors collectively contributed in deciding which material was to be used. Every material had some shortcomings and strengths and neither of the materials behaved appropriately in every condition but it was up to us to decide the point till which we could compromise on the temperature response without compromising on the stress profile. This influenced us to go for poly ether imide which is commonly refe rred to as PEI. This material remains very stable thermally up to temperatures like 200 o C (Frese et al., 2007). Not only that but it offers a very high resistance to wear a high speeds and pressures. DPMSU is a process which involves high pressures to drill the holes during operation and therefore, it needs continuous sliding. PEI becomes very suitable for such conditions. It is also highly resistant to thermal cracking and is denser than the other polymers. Apart from all these qualities, PEI is also very resistant to any sort of reaction influenced by chemicals (acids, alkalis, fuels and alcohols etc). Most importantly, it offers a very high tensile strength of 16000 psi throughout a very vast range of temperatures from -270 oC to 300 oC. PEI has very good mechanical properties at very high temperatures and very likely for our project. The only issue was that due to such an impressive range of advantages, PEI is relatively more costly than the other polymers. Despite that, our t otal cost is still very low if compared to the material cost of metals. (Frese et al., 2007) PEI offers a very wide range of applications in industry due to a lot of factors. It is very robust and has high strength which makes it very promising for usage. Some of its most common applications are as followed: It is used in the electronics industry specially for making integrated circuits. The reason for this is its high thermal stability and effective usage at a diverse range of temperatures. (Kuznetsov, 2000) It is used in aerospace industry due to the high strength it offers. (Kuznetsov, 2000) It is used in automotive industry due to its incredible surface finishing. (Kuznetsov, 2000) Task 1 (c, e) 4. Design Considerations We do know that the most suitable process for mass production of polymer is Injection molding. Keeping that in mind, we now have to consider the parameters and steps to be followed in order to cut down the production cost and production time as much as possible. 4.1 Avoid Sharp Edges Sharp corners are the biggest source of stress concentrations and high stress concentrations lead to point failures and crack initiations even under normal loading circumstances. The primary approach while designing this work piece would be to avoid as many sharp edges and practically avoidable and replace these edges with fillets and round corners. This will distribute the stress on the surface and will increase the part life under fatigue or creep loading. Work pieces with sharp corner becomes very vulnerable to surrounding and operating conditions and will behave in a very un-predictable manner under loading conditions. (Tang, 2008) 4.2 Avoid Sinking and other post-process deformations Due to difference in the exposure temperatures, all layers within the material cool down at different rates with respect to each other. This leads to the outer surfaces solidifying faster than the inner layers. This causes stress in the inward direction and the shape of the piece starts to change. The outer layers start sinking into the workpiece and this phenomenon becomes more dominant when there are multiple geometries of different thicknesses. To avoid such a situation, the thickness of the work piece should be kept as low as achievable according to the design. Sinking leads to discontinuities in the piece geometry and also induces unfavorable internal stresses. (Tang, 2008) 4.3 Material Optimization During manufacturing, attention should be given to save as much material as possible without compromising the integrity of the work piece. The designing should be done in such a way that the weight of the work piece is minimum possible with optimum required strength. This will not only lead to more weight but will increase the cost unnecessarily. Care has to be taken when extra material is made after the molding process. (Zhang, 2007) 4.4 Drafts For easy removal of the work piece from the mold, it is essential to leave some clearance so that the mold doesnt stick to the work piece. If it sticks, it might become difficult to remove the work piece and it might end up deforming the work piece. In such cases, it is preferable to keep the draft angle from 1 degree to 5 degree. This angle will give ample clearance to the work piece and will avoid any unfavorable situation. This parameter is essential for the smooth running of this process. (Zhang, 2007) 4.5 Material response to the mold It is very information that the material responds to the process appropriately. The material properties play the main role in defining the processes to be followed or the steps to be taken. The material should be decided very carefully keeping into consideration, all the problems and complications it might face in the process. The molten form of the material should be such that it accommodates itself perfectly within the mold and cover all the fine details within. The material should not sink after solidification and neither should it warp. (Wu, 2006) 4.6 Minimum work to be done of the work piece after molding The manufacturing should preferably be done by an experienced person. This will result in a much better and refined product and minimum refinement work will have to be done after the manufacturing. The mold plays an equally important role in the look of the product. A mold with a smooth inner surface will produce a very smooth outer surface of the work piece and hence very little work will have to be done to give the work piece a final touch before being used. (Wu, 2006) 5. Concerns and recommendations There are few concerns which have to be taken into consideration during our design and manufacturing process of DPMSU. These are as followed: If we are to run a machine, it is to be made sure that all the written information on the manual is communicated to the user as a lot of safety hazards are particularly mentioned on the user manuals. These manuals also contain procedures to be followed and precautions to be made so reading these documents is recommended before the usage of the machine, for safe and smooth operation. It is very crucial that the product is safely removed from the mold after solidification and nothing is damaged during its removal process. It is therefore essential that necessary clearances may be left in the mold and draft angles are taken into consideration while designing the mold. These angles greatly assist in the removal of the work piece after it has solidified. During the design process, it is to be taken into consideration that the stress is evenly distributed through the work piece and nowhere in the specimen should the stress be high enough to initiate a crack or cause any structural failure. Sharp edges and corners are the biggest source of high stress concentrations and must be replaced with the contoured surfaces in order to avoid stress concentration areas which may lead to mechanical failure of drill press main sliding unit during drilling operation. The mold plays a major part in defining how much time a particular process will take, how much of a share would labor cost have in the total cost and how good of a surface finish would be obtained. If these parameters are well understood and well implemented, work piece removal becomes very time and cost efficient. The machine should be completely utilized and hence the ejector pins should be taken into full use while removing the work piece. For minimum wastage, it is important that material with the most suitable condition and position is used throughout the operation. The machine should be used by an experienced person, who will make sure that minimum material is wastage after the process. As PEI is relatively more costly than other polymers, this consideration becomes important. It is necessary that the work piece is consistent and regular in dimensions. It is also to be considered that minimum post-process work is done and the manufactured specimen is gone through minimum finishing processes. To achieve this, the mold should be very smooth and the machine operator should be very experienced. Task 1 (d) Previously, injection molding is suggested for the prototyping of the component. Injection molding is also suitable for batch production of drill press main sliding unit but following things must be taken into consideration: If injection speed is high with less solidification time, it may lead to the deformation of material with time. To prevent this issue, speed of injection molding and time for solidification must be optimized in batch production. Drill press main sliding units is used to hold the drill bit and holder. Due to machining operation, temperature of the assembly may rise. Moreover, unexpected stresses on the component may occur. So, manufacturing method must yield polymeric component with optimized thermal conditions to avoid any catastrophic failure later on. (Rajput, 2008) Variations in dimensions is a common issue in polymeric components. To avoid this, synthetic hardening resins could be used while doing injection molding. These resins may enhance surface hardness of the component. (Tang, 2008) Porosity and air bubbles left in the component during manufacturing may lead to brittle failure later on. To avoid this, porosity must be prevented to occur. (Tang, 2008) References Groover, M. (2010). Fundamentals of modern manufacturing. 4th ed. New York: JOHN WILEY SONS, INC. Rajput, R. (2008). A textbook of manufacturing technology. 1st ed. New Delhi: Laxmi. Tang.Z.Y. (2008). :Plastic Mould Designer Guide[M],edited by Mechanical Industry Publishing House,Beijing. Wu.Z.Z,Wang.Q,Pang.Y.X,Zhang.H.A:Plastic Mold Design Guide,edited by National Defense Industry Press,Beijing(2006). Zhang W.H:Injection Mold Design of Practical Tutorial[M],edited by Chemical Industry Press,Beijing(2007 T. Frese et al., Electret Properties of Polyetherimides: Influence of Water Content and Comparison with Other High-Temperature Polymer Films, Macromol. Mater. Eng., vol. 292, pp. 582-587, February 2007. Kuznetsov, One-pot polyimide synthesis in carboxylic acid medium, High Perform. Polym., vol. 12, pp. 445-460, June 2000.

Bluetooth :: sCommerce Technology Essays

A new technology of the 21st century is reshaping human life. The concept of silent commerce, commonly known as â€Å"sCommerce† is the silent transfer of knowledge and information through mobile phones and electronic devices. Sadly, this technology is initiating the transition from a humanistic society to a more electronically controlled world. This new, perhaps, frightful world introduces electronic devices capable of thinking for themselves without human control. Imagine the average teenager purchasing a CD player with enough intelligence to exchange and communicate with his/her laptop without the child’s consent. Or your Kenmore â€Å"frig† secretly letting your grocer know when you’re out of milk. Scary isn’t it? Well, sCommerce, particularly the Bluetooth chip, gives these electrically run â€Å"gadgets† these abilities. It allows inhuman things to have human capabilities and perhaps exceed our own â€Å"brain power.† T ruly, the Bluetooth chip may be an eye opening technological breakthrough, but has harmful humanistic, economic affects with its integration into the electronic and mobile/telecommunication world . Realistically, the average technologically involved person has heard the term â€Å"Bluetooth.† The apparent name of this chip is derived from the 10th century Scandinavian king, Harald Bluetooth, who was historically known for uniting various unorganized kingdoms. Similarly, Bluetooth is specialized to unite many competing electronic standards under one main specification. By definition, â€Å"Bluetooth is a global de facto standard for wireless connectivity. Based on a low-cost, short-range radio link, Bluetooth cuts the cords that used to tie up digital devices. When two Bluetooth equipped devices come within 10 meters range of each other, they can establish a connection together.

Essay --

Introduction Cloud computing is the transmission of computing as a competence rather than an industrial good, whereby common means, software, and signs are delivered to computers and other apparatuses as a service over a system (Mell & Grance, 2011). Cloud computing acclaims, characteristically unified, facilities with the transported data, software, and control through a connection. Software as a service (SaaS) is frequently touched with cloud computing. End users have an access to cloud depended claims through a network browser or a light weight desktop or mobile app while the occupational software and facts are deposited on servers at a distant place. Cloud applications attempt to stretch the same or healthier service and presentation than if the software packages were connected nearby on the end-user processors. At the basis of cloud computing is the bigger idea of organization meeting (or Converged Substructure) and communal facilities. This sort of data focused environment permits enterprises to develop their requests up and running earlier, with calmer manageability and fewer upkeep, and allows IT to additional quickly adjust IT resources to encounter changing and unpredictable occupational demand. Cloud Clients Operators access cloud computing consuming interacted client strategies, such as desktop processors, laptops, tablets and mobile. Among these tools, cloud clients depend cloud computing for completely or a mainstream of their requests so as to be fundamentally lack of it. Instances are thin customers and the chrome nooks based on browsers. Numerous cloud submissions do not need precise software on the client and in its place use a net browser to interrelate through the cloud application. With AJAX and HTML5, these... ...asonable. It is also true for traditional/conventional data centers. Therefore countries with promising circumstances like Sweden, Europe and Switzerland are demanding to enthrall cloud computing statistics centers. Energy competence in cloud computing can consequence from energy conscious preparation and server alliance. Though, in the circumstance of dispersed clouds above data centers with dissimilar basis of energies counting renewable basis of energies, a small negotiation on energy ingesting reduction could outcome in high carbon footprint drop. This technology is expected to grow by leaps and bounds in the coming years, and may very well be one of the innovative technologies that spring our civilization into a new era. The speed in which information is being transferred and stored is growing constantly and there is no sign of that slowing down anytime soon.

Business Plan - Nursery ::

I have selected a nursery because there is high demand in the UK as well that there is a reasonable amount of profit SUMMARY PEOPLE I intend to employ on 3 to 4 employees along with my self and cater for approximately 12-20 kids once the business has established itself then I may decide to expand and cater for more children. THE PRODUCT I have selected a nursery because there is high demand in the UK as well that there is a reasonable amount of profit, which can be made if the business is planned out correctly. One of the main reasons why demand is so high is that more women then ever before are going to work, and therefore day nurseries provide a suitable environment for their children to be looked after in. THE MARKET ---------- One of the main reasons why demand is so high is that more women then ever before are going to work, and therefore day nurseries provide a suitable environment for their children to be looked after in. PRODUCTION Since my business is basically a service that is a day nursery hence there is no production involved it is the services, which I provide to my customers. I offer milk to the kids, if any of the kid needs milk I will be offering them, then there will be a rest room in which those kids who are tired can sleep in that room, the third service which I offer is playing, I will be having a room in which all the toys will be there all the kids can play there, my childminders will play with them, and the fourth service is giving the kids basic education. EXPECTED PROFIT For my business to be successful it is very important that it should make profit , so at the end of one year I will be making a profit of  £2454 which shows that my business is going to do well, its just the starting as and when my nursery becomes popular among the people I thing it will be doing well and making more profit. FINANCE NEEDED As mentioned in financial and production plan I will be looking to obtain a loan of  £5000 from the bank. If the bank rejects my application, then I will consider getting a sleeping partner so that I can apply again for lower amount. I could also find a partner and then half the investment. This is because currently I have personal savings of  £3500 and could use  £2500 of this to open my business with my partner. When discussing the plan with my father, he agreed to help

Staying Informed: Old News

There was a time when news information was disseminated by a select few who had access to the relevant reports, files, and statistics.   When this was the case, the world gathered around a radio, shared a newspaper, or turned on the television—one that had fewer than ten channels).   This â€Å"news† was often like a leftover meal in terms of value: by the time it was released, the world had moved forward, and something new was hot. Progress was made, and television news programs began to delve deeper into stories; reporters suddenly began delivering â€Å"breaking† news reports, and the information was at least lukewarm when the public got its hands it.   It was the era of reporters like Paul Harvey who took what the world knew, dug more deeply, and presented â€Å"the rest of the story† (Radio Legend Paul Harvey Biography, 2003). Today, a cell phone can alert its owner of breaking news stories from around the world; reporters deliver broadcasts live from battlefields; and the internet has made it possible to receive information almost instantly.   Most consumers now get their news online, via one of hundreds of television channels, or through a variety of print media.   Unfortunately, the days of print media and even local reporting seem to be dying, and while their loss may not even create a ripple, what they have to offer the consumer is irreplaceable. It is true that the average printed report cannot provide the live-action, emotionally packed footage of a series of photographs or a streaming video, but words do matter, and while one’s brain struggles to capture the intricacies of backgrounds, sounds, and images that flash in front of the eyes in photographs and videos, the thought-process of the viewer is overwhelmed by the visual imagery. MSNBC online featured a written report and a series of videos and slide shows on October 16, 2006 that captured the story surrounding the earthquake in Hawaii the previous day. When compared, the headline video and headline print report reveal some very interesting trends in the ways in which the news is disseminated. The headlining video report â€Å"Powerful Earthquakes Shake Hawaii† is two and one-half minutes long and features a variety of images that show damage to a local woman’s home, the picture of a landslide caught by a photographer, various tourists being inconvenienced, file footage of volcanic eruption, the Hawaiian coastline, people buying gas, and shoppers at a grocery store. These pictures are accompanied by interview sound bites or voiced-over by reporter Howard Dashefsky, but the entire report is devoid of real information.   What might one expect as the aftermath of an earthquake on a populated island that is also a tourist attraction?   If I had guessed at the â€Å"aftermath,† I would have imagined almost everything I saw in Dashefsky’s report.   Although the images were fascinating and even engaging at times, I left the report with virtually no residual caring and no remnant thoughts: nothing of value had been added to my brain. The headline print report begins with â€Å"officials fanned out across Hawaii early Monday to inspect bridges and roads following the strongest earthquake to rattle the islands in more than two decades, a 6.6-magnitude quake that caused blackouts and landslides, but no immediate reports of fatalities† (Associated Press).   In the opening paragraph of the print report, I found out what happened; I felt sorrow and relief; and I was driven to consider the after-effects of the earthquake in ways not even broached by the video report.   It took me less than one minute to read the print report, but in that minute I learned about what had happened, where it had happened, that no tsunami was expected, what was being done, what would be done—the list is almost endless. Those who watch the video report will stand around water coolers discussing benign elements of the event.   The will recall the semi-ravaged home of one resident and the fight to get gas and groceries; moreover, they will congratulate themselves on not having wasted their own money on a spoiled Hawaiian vacation.   This is the kind of thinking that is being fostered in the United States: superficial, image-based, self-centered, and desensitized. Those who take (less) time to actually read about the earthquake will stand around the water cooler discussing factual details.   They will likely be amazed by the good fortune of such a historically large earthquake resulting in no fatalities; they will wonder if the roads and bridges where they live would be damaged after such an event; they may ponder how long the state of disaster will remain in effect; they will think about how happy they are not to be there on vacation, but it will most likely not be the first thing on which they comment.   This is the kind of thinker that is in danger of dying in the United States: one who craves facts and the chance to critique them while expanding his/her knowledge base. The ability to receive immediate information is a boon to the news consumer; however, the availability of instant images, facts, and reports must be combined with words that are as stimulating, powerful, and informative as the visual clues—or a numbing of the mind and the senses is bound to occur.   Reports that are piping hot can be delivered to the public as a combination of the best of what can be seen, what can be heard, and what can be read.   Like a dinner filled with the necessary food groups, communication needs to combine its sources and resources for the most palatable and healthiest results. References Associated Press, The.   (October 16, 2006).   Hawaii checks bridges, roads after quake: Landslides and power outages but no reports of deaths.   MSNBC.   Retrieved October 16, 2006, from http://www.msnbc.msn.com/id/15286294/. Dashefsky, H.   (October 16, 2006).   Powerful earthquakes shake Hawaii.   MSNBC Video.   Retrieved October 16, 2006, from http://video.msn.com. Radio Legend Paul Harvey Biography.   (2003).   Paul Harvey: The Voice of the New Millennium.   paulharvey.com: ABC Radio Networks.   Retrieved October 16, 2006, from http://www.paulharvey.com/bio.shtml.

Alcoholism And Rehabilitation

Alcoholism, also known as alcohol dependence, is unfortunately a widespread ailment which spans people of all age groups and socioeconomic levels. The health risks of this disease, and alcoholism is a disease, are as widespread as the individuals who contract it. In addition to these health risks, alcoholism is also an influencing factor in another problem plaguing societies, domestic violence. Thus, alcohol and anger create a sometimes fatal combination. As a result, rehabilitation success rates are vital in the ridding alcoholism and its negative effects from society.Alcoholism is a disease which can be described by degree. Alcohol dependence describes individuals who have developed a â€Å"maladaptive pattern† of alcohol consumption which is characterized by a developing alcohol tolerance, withdrawal symptoms, or hangovers, and the inability to stop drinking. It doesn’t stop there People with alcohol dependence may progress to alcohol abuse which can significantly in terfere with their social lives, their work or their interpersonal relationships.In addition, this abuse can also cause a host of related issues including â€Å"major depression, dysthymia, mania, hypomania, panic disorder, phobias, generalized anxiety disorder, personality disorders, any drug use disorder, schizophrenia, and suicide† (Cargiulo 2007). According to the National Institute on Alcohol Abuse and Alcoholism (NIAAA), drinking up to 14 drinks in a week for men or seven drinks per week as a woman could indicate alcohol dependence. In addition, the NIAAA estimates that up to nearly 18 million Americans could be considered alcoholics (Lauer 2006).That amounts to way too many individuals who are addicted to a drug that is both physically and mentally harmful, not to mention the effects on society as a whole. Despite the many mental and physiological problems that are associated with alcoholism, some of the most frightening are the health problems associated with the brai n. Evidence exists that shows the damage that alcohol consumption does to the brain. Brain imaging studies have revealed that people with alcoholism have significant differences in parts of their brains than those without alcoholism.The brain volume is reduced in alcoholics as well as the blood flow to the brain. The reduced blood flow has been linked to a lowering of inhibitions and memory, impaired cognitive function in general and even damage to the corpus callosum (Cargiulo 2007). Thus, alcoholism can directly translate to serious problems with the mind. These problems can lead to long term brain damage. Lesions in the brain form in those with long term patterns of alcohol abuse. This can translate into Korsakoff’s disease which is characterized by motor impairment and thinking impairments which can affect a person’s ability to care for himself.In the end, the individual may have to be cared for institutionally. Alcohol affects the neurotransmitters in the brain. A s the disease progresses to chronic status, the brain cells begin to adapt to the alcohol that seems to reside permanently in the brain. As a result, the brain becomes reliant on the alcohol to work. If alcohol is removed, the symptoms of withdrawal take longer and longer to subside. Ultimately, the brain tissue will rebel, in a way, and the withdrawal symptoms can be severe, even fatal. Once the cells in the brain die, they cannot be regenerated (Shoemaker 2003).These effects seem to affect males to a greater degree than females. This fact can be explained by differences in drinking patters, choice of alcoholic drinks, rate of alcohol metabolism and the protective effects of hormones such as estrogen (de Bruin, 2005) As such, alcohol dependency and abuse is three times more prominent in men as it is in women even though evidence suggests that for both genders, the numbers are underreported (Cargiulo 2007). As if the physical effects on the body were not bad enough, the behaviors of individuals who are addicted to alcohol are also quite dangerous.The drinkers find themselves to be less inhibited and more willing to engage in risky behaviors. Many of these behaviors can be characterized as aggressive and violent. In addition to the money that society has to pay for the medical care, it is also very costly to sort through all the social issues that alcoholism may create. Galvani (2004) gives several possible reasons why this risky and damaging behavior may occur in drinkers. Physiological theories argue that ethanol, the drug in alcohol increase aggression biologically.A theory known as Disinhibition Theory notes the earlier link between alcohol and cognitive function, specifically the portion of the brain mentioned above that regulates levels if inhibition. The Deviance Disavowal theory argues that the abusers use alcohol as a reason for their behavior and consciously drinks so that they can blame the alcohol for their actions. Social Learning theories explain that people will act in a way based on their experiences around others. Therefore, parents and societal expectations can lead to alcoholic abuse and abusive behaviors (Galvani, 2004).As with many ailments, more than one option for treatment exists. Many of these options can occur in conjunction with others. For years, behavior modification such as one might find in various 12 – Step Program or other similar programs have been the way of choice. These programs focus on the addicts significantly changing the way they behave in society including the people with whom they associate. Either a professional or a group of individuals led by a former addict facilitate the alcoholic’s recovery.Alcoholics Anonymous (AA), is an organization most known for its success rates for alcoholics’ recovery. It is available to anyone who desires its services. Lately increasing research evidence has found that a 12-step program affiliation is not only effective on its own, but even mo re effective along with professional, medical treatment, including residence based programs. The truth is, â€Å"Involvement with AA is consistently and positively associated with improved drinking outcomes, replicated across a large volume of studies using a variety of treatment methods† (Cloud, Zeigler and Blondell, 2004).The reason for this success is the three core items of AA: identification of self as a member, the number of steps completed, and the quantity of meetings attended (Cloud, Zeigler and Blondell, 2004). It can be a tiring process for an already worn individual. Because so many of these types of programs rely on frequent attendance by the alcoholics. One study sought to find the correlation, if any, between the duration of treatment and the level of intensity of the treatment. Moos and Moos (2003) conducted a study of 276 alcoholics who began formal treatment for alcohol abuse.These patients were involved with out-patient programs, residential programs, or a combination of the two. The average length of treatment was 20. 7 weeks, and the average intensity, or number of contacts, was 2. 8 contacts per week. These researchers first note that the individuals who had longer duration of treatment usually had less intense treatment. They found that patients who had a short treatment duration, which is considered 1-8 weeks, were more likely to abstain from alcohol than those who received no help whatsoever.If the treatment lasted for nine weeks or more, then the patient was even more likely to abstain from alcohol. This seems to suggest that the longer the treatment duration, the better the individual may respond to the treatment (Moos and Moos, 2003). However, recently the question has arisen as to whether or not recovering alcoholics must completely abstain from alcohol or not. Most programs, such as AA, or other groups perhaps affiliated with churches or in-patient and out-patient residential programs, build potential and motivation for suc cess on complete life changes.These changes includes huge behavior shifts which focus on completely eliminating alcohol. Unfortunately, many people do not seek treatment because they don’t want to completely give up the occasional beer or social glass or wine. Humphries, Weingardt, and Hoyst (2005) agree and have encouraged programs like Moderation Management which do not force individuals to part with alcoholic beverages forever. Allowing a choice of goal may be one effective way to increase the numbers of people willing to enter alcohol treatment.It is estimated that as few as 10% of individuals with alcohol use disorders attend treatment; more flexible goals may appeal to a wider range of these people. There is also evidence that therapy can move people toward choosing a realistic drinking goal for themselves (Humphries, Weingardt, and Hoyst, 2005). On one side of this debate are those that argue in favor of abstinence. They say that the disease controls the individual and that this person will definitely lose control of they are exposed to alcohol, even a small amount . (Humphries, Weingardt, and Hoyst, 2005).Never drinking again is the surest way to â€Å"cure† this disease. Alcohol recovery patients are constantly reminded that they are and always will be an alcoholic, just like a diabetic always will be a diabetic. Opponents to the abstinence-only argument argue that people and their problems with alcohol are all different with different times of drinking and different levels of drinking. The researchers use the common phrase â€Å"different strokes for different folks† in describing this philosophy. While they agree that some problems require abstinence, but they allow that other individuals could moderate their drinking and still improve.They call this a â€Å"harm-reduction orientation toward alcohol problems† which â€Å"focuses less on the amount of alcohol consumed and more on helping individuals decrease the harms rel ated to alcohol use. Although abstinence may be desirable, it is not the primary measure of successful outcomes† (Humphries, Weingardt, aned Hoyst, 2005). Some of the personal demographics of individuals who are more likely to experience success on non-abstinent programs include younger people, those with social and psychological stability, those who are regularly employed, and those who believe that they can seriously manage a moderate drinking program.However, if the patients are pregnant, experiencing liver problems, or are in the advanced stages of alcoholism, they may be forced to consider only the abstinence route (Humphries, Weingardt, and Hoyst, 2005). Another reason that some people avoid seeking treatment for alcoholism is their reluctance to commit to residential or in-patient treatment. Luckily, recent studies have indicated that outpatient treatment is effective in treating alcoholic dependency. Studies of this type have reported abstinence rates of 34-59% for 6 m onths post-treatment, 48 % for 19 to 24-month post-treatment and 52% for the 49-month post-treatment mark.In Bottlende and Soyka’s study of 2005, their rates were slightly higher for the six month mark at 64% abstaining, and 14 % significantly reducing their alcohol intake with a 22% rate of serious relapse. Perhaps, if people understood that they could get good results with a outpatient program, they would be more inclined to seriously consider treatment. Additionally, alcoholics do not need lengthy terms of treatment. Perhaps a brief commitment would do the trick for many with alcohol problems.â€Å"Brief interventions targeting alcohol consumption have been found to be very effective in changing clients’ consumption levels† (Roche and Freeman, 2004). One study cited by these researchers noted that heavy drinkers were likely to reduce the amount of alcohol they consumed six and twelve months after a brief intervention as compared with similarly heavy drinkers who received no interventions whatsoever: A WHO study conducted in eight countries involving over 1600 participants found that brief interventions reduced daily alcohol consumption on average by 17% and intensity of drinking by 10%.Brief interventions also reduce the number of alcohol-related problems, health-care utilization and associated treatment costs and the number of emergency department admissions. Brief interventions are also highly cost-efficient due to the minimal cost of the intervention and the breadth of scope for prevention of more serious and more costly problems (Roche and Freeman, 2004). However, the same benefits were not noted for women or for low consumers of alcohol who occasionally drank at very hazardous levels, also known as binge drinkers.Evidence suggests that â€Å"the majority of alcohol-related harms† affect these moderate to low drinkers who binge (Roche and Freeman, 2004). This study just shows that people do react differently to alcohol. One h uge area of research in alcohol rehabilitation right now is in the area of gender. The above study mentioned that women do not receive the same level of benefits from brief interventions as men receive. This has led many researchers to fill the research gap between studies that focus on only males or on mixed genders and females. While women have a lower rate of substance abuse, those that are alcoholics suffer just as men do.In fact, women actually suffer more severe effects in some cases than men do. For example, women have more alcohol related health issues, â€Å"mental disorders, death rates, quicker addictions and greater social isolation and stigma† (Najavits, Rosier, and Nolan, 2007). This is unfortunate because women have become increasingly more addicted to alcohol at younger and younger years of age. However, studies also indicate that while in treatment, women show more rapid improvement and are more able to control impulsive behaviors that are so problematic for men (Najavits, Rosier, and Nolan, 2007).Of course, one rehabilitative method that is often overlooked in the search to rehabilitate alcoholics is the pharmacological method. While drugs are frequently use to aid in helping alcoholics avoid painful and dangerous withdrawal symptoms, others are now being marketed as treatment methods themselves. One such drug is Acamprosate which is a synthetic compound with a similar structure to that of the neurotransmitter GABA and the neuromodulator Taurine† (Scott, Figgitt, and Keam, 2005).Once the patient is detoxified, Acomprosate helps the patient maintain abstinence in the place of rehabilitation programs. This way, individuals can maintain his social and professional life. Several studies found this to be true a year after use had begun â€Å"irrespective of disease severity or the type of psychosocial support† (Scott, Figgitt, and Keam, 2005) the patient received. Also, the drug appears to pose few tolerance issues such as naus ea, diarrhea or the like. A second prescription medication is available for the treatment of alcoholism.Naltrexone has also produced very positive results in promoting abstinence among recovering alcoholics. This drug has also had several positive research trials and works better in conjunction with behavioral therapy. One way this drugs works is to result in a reduced urge to drink and negative physical side effects if it is taken in conjunction with alcohol (Rohsenow, 2004). Alcoholism is a horrible, addictive disease that leads not only to medical problems such as brain and liver problems, but also to psychological problems, social problems and even violent behavior.The disease affects individuals differently, and new approaches are always being considered to treat each sufferer. While abstinence only and residential programs seem to have prevailed in the past, the new approaches are leaning to more brief, outpatient programs and interventions that support both abstinence and mod eration when it comes to alcohol consumption. These new programs also take into account differences that result from race and gender. With hope, this disease will soon be tamed, or even eradicated, with better and better rehabilitation programs.. References Bottlender, M. & Soyka, M. (2005). Efficacy of an Intensive Outpatient Rehabilitation Program in Alcoholism: Predictors of Outcome 6 Months after Treatment. European Addiction Research 11 (3): 132-137. Cargiulo, T. (2007). Understanding the health impact of alcohol dependence. American Journal of Health-System Pharmacy 64: S1-S17 Cloud, RN, Ziegler, CH, & Blondell, RD. What is Alcoholics Anonymous Affiliation? Substance Use & Misuse 39(7), 2004: 1117-1136 Galvani, S. (2004). Responsible disinhibition: Alcohol, men and violence to women.Addiction Research & Theory 12 (4): 357-371 Humphreys, K, Weingardt, KR, & Horst, D. Prevalence and predictors of research participant eligibility criteria in alcohol treatment outcome studies, 197 0-98. Addiction 100(9), Sep 2005: 1249-1257 Moos, RH & Moos BS. Long-term influence of duration and intensity of treatment on previously untreated individuals with alcohol use disorders. Addiction 98 (3), March 2003: 325-337. Najavits, LM, Rosier, M, & Nolan, AL. (2007). A New Gender-Based Model for Women's Recovery From Substance Abuse: Results of a Pilot Outcome Study.American Journal of Drug and Alcohol Abuse 33(1), 2007: 5-11 Roche, AM & Freeman, T. (2004). Brief interventions: Good in theory but weak in practice. Drug and Alcohol Review 23(1):11-18. Rohsenow, Damaris J. (2004). What Place Does Naltrexone Have in the Treatment of Alcoholism? CNS Drugs 18(9): 547-560. Scott, LJ, Figgitt, DP, and Keam, SJ. (2005). Acamprosate: A Review of its Use in the Maintenance of Abstinence in Patients with Alcohol Dependence. CNS Drugs 19(5): 445- 464 Shoemaker, W. (2003). Alcohol’s Effects on the Brain. Nutritional Health Review: The Consumer’s Medical Journal 88:

Jim Hawkins: A Young Pirate Essay

Stories about pirates are some of the interesting and clever stories to tell such as the Treasure Island. It is a classic story about a young pirate, written by Robert Louis Stevenson and published in 1883. It tells about the young boy, Jim Hawkins, who turned into a pirate with his crew searching for the treasure (â€Å"Treasure Island†). Robert Louis Stevenson was a famous Scottish author of travel and adventure books, but he also wrote fiction stories, essays and poems (â€Å"Robert Louis Stevenson†). He pursued engineering first followed by law; however his interest was never in either of those. He was fond of reading and travelled many places before he became a famous writer (â€Å"Treasure Island: About the Author†). The story about Treasure Island is narrated by Jim Hawkins. He tells the story based from his observations, feelings, perceptions, and on how he responds to the people and events around him. He became easily involved in the pirate game and treasure hunting since his family owned the Admiral Benbow inn. There stayed Billy Bones, the captain who has the map of the treasure that Captain Flint buried. Captain Flint is already dead however the men who worked for him are still alive and searching for his buried treasure (â€Å"Treasure Island: Character Profiles†). The first pirate that Jim met is Billy Bones who stayed at their inn. Bones is a ragged, scarred, and drunkard pirate who always sing a pirate song; but he was kind with Jim. He always asks Jim to look out for any seafaring men along the shore which Jim thought that the man only wants some company. However, it turned out that the man is eager to avoid the other seafaring men especially the ‘seafaring man with one leg’ (â€Å"Treasure Island†). One day, another pirate named Black Dog, a companion of Billy Bones, came to Jim and asked for the whereabouts of Billy Bones. Both pirates wrestle until Bones is greatly injured. However, a blind pirate named Pew came with horsemen to Bones and delivered the ‘black spot’. After Bones died, Jim snatched a key and an oilskin packet from Bones. He and his mother left immediately and went to the next village. The village people, however, are not willing to help them and the two hide under the bridge. The men continuously searched for the â€Å"Flint’s fist† but they could not find it. They escaped leaving Pew behind while the horses of the revenue officers from the village trampled him to death (Nelson). Jim and his mother stayed with Dr. Livesey and Squire Trelawney where the squire analyzed the packet that Jim got from Billy Bones. The squire said that it is the account book of the ‘black-hearted hound’. After studying the rest of the oilskin packet, they found a map of Captain John Flint’s Treasure Island. Trelawney became eager to find the treasure and planned the rest of the voyage including the finances. He secured on of the best ships in England, the Hispaniola, and hired several men including a one-legged ‘seafaring man’ named Long John Silver and a group of sailors. Jim unexpectedly became part of the instant adventure (Nelson). Long John Silver was very much liked by Jim and the squire because of his performance as the ship’s cook. At the beginning of their journey, he is friendly and helpful to the rest of the crew however he is as notorious as Captain Flint who is concerned only about the money he can get (â€Å"Treasure Island: Character Profiles†). Jim, while hiding in an apple barrel, accidentally overhears Silver, Israel Hand, and Dick talking about their plan of overtaking the ship once they get the treasure. After getting on land, Captain Smollet together with his men fought with Silver and the pirates. Jim and his group escaped together with Ben Gunn, one of the original members of Captain Flint’s crew who was abandoned in the Treasure Island three years ago. Jim together with his group is lead to Gunn’s secret cave where he relocated Captain Flint’s treasure. In spite of Silver’s plan, Jim, Trelawney, Dr. Livesey, Gunn and the rest of the group are able to retrieve the treasure and haul it to Hispaniola and return to England (â€Å"Treasure Island†). Treasure Island is an exciting book inspired by adventures of notorious pirates. During the early 1700s, thousands of pirates wander along different seas in the world who plundered ships and private vessels for coins and precious metals that were likely hidden in small islands. This perhaps is one of the sources of Stevenson’s pirate stories. However, most of the pirates began in their early twenties until they age fifty or so, some crippled, blind, or dead. Young pirates were also common, but there were no enough records to prove that teenagers became fierce pirates. Young pirates like Jim Hawkins is like a dream come true for kids who always dream of sailing and travelling and someday finding a treasure (â€Å"Treasure Island†). In the early 18th century, there was a story about a young boy who joined a group of buccaneers. The story was based from the records of Captain â€Å"Black Sam† Bellamy. In 1716, Captain Bellamy’s ship Marianne attacked Bonetta, a ship travelling from Antigua to Jamaica. Some of Bonetta’s crew joined the pirates. John King, a kid travelling with his mother, also wanted to join the group of buccaneers so bad that he even threatened to kill himself after the captain did not allow him. It was not clear why John wanted to become a pirate, but there were speculations that maybe he was with a harsh parent or he does not want to go wherever they are going. Later, a kind a charismatic Captain Bellamy allowed John King to join the band (Krystek). In connection with the story of John King, a treasure hunter named Barry Clifford searched for the remains of Captain Bellamy’s boat – Whydah that sunk along Cape Cod. He found a cannon, artifacts, and silver coins. The artifacts they found included a human leg bone, a stocking, and a shoe belonging to a tiny adult, as he said. However in 2006, after the bone was examined in The Center for Historical Archeology in Florida, they found out that the bone belonged to a child aged between eight and eleven years old. The tale of a John King, a little boy who turned into a young pirate indeed was true (Krystek). In the early chapter of Treasure Island, the story was established through the first person narrative of Jim Hawkins. Money is introduced as the major driving force of the characters’ actions. Through Jim’s narration of events, greed and corruption are even more highlighted. As the number of pirates looking for the map increases, it pushes Jim into learning more about the treasure and acquiring the map. The first six chapters slowly unravel Jim’s transformation. He is now not controlled by Billy Jones and the other pirates and he chooses to stand with his mother and save her. He is beginning to take part into the action happening and acted like a hero (Nelson). In the middle chapters, more terrible things happened which challenged how Jim would respond. Jim has witnessed several deaths including Billy Bones’ and Tom’s. However, his response to the death of Tom’s death is different from Billy Bones’. He cried at Bone’s but not to Tom’s death where he just sat in silence. Upon arriving at the island after all the terrible things that he witnessed, Jim found a friend and a father figure whom he has gained trust (Nelson). At the later chapter, Jim is able to develop both physical and moral strength after their triumph against the pirates. Jim is able to survive and gain enough guts to face Silver and his crew and help his crew. He has matured and does not act like a child in the middle of the events. Jim is a child and adult in deciding and justifying the things he did. He is now acting not just to save himself but also the rest of his crew after he stole and find a boat. He became the story’s hero but not because of luck and fortune. Also, Jim does not forget how to be adventurous and try things despite failure. He never gives up although he is now engaging to wrong choices, these are justifiable by the arbitrary death that could happen anytime (â€Å"Treasure Island: Character Profiles†). Throughout the story, Jim Hawkins character changed from a simple observer of the events around him into a character who became actively involved and became a certified pirate. Even though he is just a kid, he is able to help in uncovering the mutiny plan of Long John Silver and retrieve the treasure. He became a competent boy physically and beat Israel Hands. He has grown morally mature after choosing not to run away from Long John silver despite Dr. Livesey urging him to. Jim is a smart boy with courage and good heart. Anyone reading the book could easily identity himself with Jim. Stevenson created it in such a way the reader could put his own imaginations in place of Jim. Jim Hawkins is an open, predictable character who narrates the story by telling what he sees and observed, but is close in telling his own feelings and thoughts about the other characters (Nelson). The transformation in Jim’s character was evident when he delivered a speech to the pirates. He is able to survive and save himself against the fierce pirates by offering deals that an adult would usually do. His courage has developed from their journey, a courage that he does not have back to the inn. An interesting encounter between Jim and Long John Silver once proved Jim’s ability to stand up and fought for himself even though it is Silver, a notorious pirate, he is talking to (Nelson). Jim Hawkins justifies the thoughts and imagination of a teenager and later the beginning stage of maturity developed from the combination of different adversities. The story of Jim Hawkins and the Treasure Island is not as exciting as it is when summarized because there is no other of telling his story in such an engaging way except reading all the chapters. Works Cited Krystek, Lee. â€Å"The Littlest Pirate†. 2006. 5 May 2008. . Nelson, Britanny. â€Å"Gradesaver: Treasure Island – Study Guide – Character List†. 2008. 5 May 2008. . â€Å"Robert Louis Stevenson†. 2008. Jalic Inc. 5 May 2008. . â€Å"Treasure Island†. Bibliomania. com Ltd. 5 May 2008. . â€Å"Treasure Island†. 2008. Wiley Publishing. 5 May 2008. . â€Å"Treasure Island: About the Author†. 2008. Wiley Publishing. 5 May 2008. . â€Å"Treasure Island: Character Profiles†. 2008. Novelguide. 5 May 2008. .

Attachment Theory Essay

Hunting and Fishing has been a part of the past and present of America. It plays a vital role in the history. Even in the society today, hunting and fishing contributes a lot in the society. Centuries ago, hunting and fishing are means of survival for the ancient people. But as years pass development began, and the traditional ways of surviving has also developed. The number of hunting and fishing had also decreased. People using hunting and fishing for survival become lesser because of agricultural and industrial development. The purpose of hunting and fishing was also changed, as a survival means to sports. Hunting and fishing was said to be a significant activity in the history and to the society of today. But how does hunting and fishing began? And how it evolved from survival means to a popular sport? Hunting was a way of killing wild animals to obtain something, during the ancient times a person hunts to obtain food, clothing and shelter. It was a necessity during those times; hunting was the primary source of the basic needs of the people. A person hunts to be able to provide the family food, fur and leather for clothing, and hide for shelter. Those times having a good source of the group’s needs makes a strong foundation, it helps a tribe or a group survive. Through the centuries development had occurred and also changed the ways of people, one of these ways is hunting. Hunting gradually lost its purpose as the primary source of food due to agricultural development and manufacturing. But because of the challenge and excitement it offers, people enjoyed hunting and considered it as a past time which later become a sport. Egyptians, Greeks and Romans considered hunting as a sport. For the Greeks, hunting develops a healthy body and well-being. It is not only now that hunting has regulating law, during the 13th century Kublai Khan, a Mongol emperor restrained his subjects from hunting. As well as the Feudal Lords during the 5th-15th century, they restricted the noble people from hunting (it was a popular past time for the nobles). But during the 14th century, the traditional method of hunting was changed when the gunpowder was invented. Instead of using trap, snare, bow and arrow, hunters began to use rifles and shotguns. Rifles and shotguns was easier to use, and has longer range. Though modern methods of hunting was introduced, some hunters still prefer the original weapons used in hunting for the reason that it was more challenging than the modern method. Hunting then became a very popular sport, too popular that it became widely known. But as its popularity arises, the hunted animals became fewer. In 19th century, some of the hunted animals became endangered species. The government to cope with the decreasing number of wildlife regulated the game of hunting. In some state hunting was not allowed anymore, but in some state limitations are set. People are allowed to hunt but during the hunting season only, and there is only a limited amount of animal that can be killed per hunter. Due to the restrictions imposed the number of â€Å"game animals† and endangered species were increased. But this also became a problem; the wild animals became over populated and have to allow hunting again to regulate the amount of the animals. Since then hunting became legal and became a very popular sport. Hunting was considered a recreational activity and increased the tourism of the country. Fishing on the other is the same as hunting; it was known as a source of food. Ancient people use pieces of bones as hooks and the vines as line. The Egyptians, Greeks and Romans are the civilization that already uses fishing during those times. An Egyptian writer even wrote some tips on how to fish. In the 2nd and 3rd century a Macedonian wrote about the use of artificial flies to lure fish. In the 15th century â€Å"sport fishing† was introduced. It was not only become popular in America but also in Europe. When it was introduced as a â€Å"sport fishing†, there was already a written book about how to use a fishing rod, how to tie knots in fishing lines and using artificial lures and flies. Many people become very interested in fishing, and these written books made fishing more popular. The â€Å"sport fishing† was not a popular sport only for men but also for women. The participation of women in the â€Å"sport fishing† increased the people’s interest in it. Some organizations are even built to protect the fish habitats. Just like hunting, fishing also undergone the same evolution the hunting had gone to. Through Fishing the tourism and business of the country was increased. Both hunting and fishing was already a necessity in ancient times, people gained many benefits through these methods. It even becomes a tool for survival. Until now, even though hunting and fishing were already considered as a sport or recreational activity the society still gains many benefits from it. Hunting and fishing helps the government in protecting and conserving the wildlife habitat of the country. Because of the popularity of these two sports, the government managed to gain funds to maintain the wildlife reserve. Through the system imposed, taxes are imposed on the manufacturer of weapons used on these methods and on the fuels. There also hunting and fishing fees, these system helps in regulating the wildlife habitat of the country. It even attracted hunters and fishers to create a private group to protect the fishing and wildlife habitat. Because of the protection and conservation, the country managed to maintain an abundant wildlife habitat and increased the tourism of the country. Whether in past or present, hunting and fishing had really played a vital role in the society. In continues to help the country, first for survival and then became for tourism. Hunting and fishing became a part of the culture of the America. These two sports not only provide pleasure and enjoyment, but also protection to the wildlife habitat. Maintaining these two sports was really a great help, not only for the sake of an individual but for the whole society. Sources: The Legally Structured Role of Hunting and Fishing in the US and Abroad. Available at: www. huntingreport. com. Hunting. Available at: www. encarta. msn. com. â€Å"History of Fishing†. Available at: www. activeangler. com.